HVAC & Plumbing Services in Indianapolis, IN

Successfully installed a new Carrier 80% efficient 2-stage Performance 70K BTU gas furnace with a 2-ton, 2-stage Performance A/C system and Ecobee thermostat. The complete installation included an Aprilaire media filter, disconnect, pad, 40-gallon gas water heater, proper PVC venting, condensate drainage with trap, and comprehensive duct cleaning to ensure optimal system performance.

Responded to no-heat call for furnace not reaching setpoint (63°F actual vs. 68°F setpoint). Diagnosed system and found recently replaced air filter. Inspected residential furnace system including PVC venting and ductwork connections. Restored proper heating operation and verified system performance before departure.

Conducted comprehensive HVAC replacement estimate for customer's furnace. Thoroughly reviewed different equipment options, explaining technical specifications and energy efficiency features of various models. Customer requested detailed explanation of available technologies and will consider options before making final decision.

Responded to commercial customer complaint of noise and water leakage from unit above server room. Diagnostic testing revealed significant frost buildup on evaporator coil with temperature readings of 53.7°F, indicating possible refrigerant flow restriction or airflow issues causing condensate overflow.

Successfully installed customer-supplied AprilAire thermostat control unit, properly connecting all required wiring (red, yellow, green, blue, white, and orange) to appropriate terminals. Verified system functionality with power indicator showing green status light illumination. Control unit now properly configured to manage heating, cooling, fan, humidity, dehumidification, ventilation, and air cleaning functions.

Inspected customer's property regarding water intrusion around RTU flues. Discovered severely damaged roofing membrane with tears and deterioration, allowing water penetration into the building. Documented damaged piping and compromised waterproofing with photos for reference in developing appropriate repair solution.

Performed comprehensive evaluation of existing HVAC system following referral from existing client. Visual inspection revealed failed heat exchanger and malfunctioning control board requiring full system replacement. Documented existing thermostat configuration and evaluated current ductwork in utility area to prepare detailed replacement estimate.

Investigated customer complaint of basement water damage after recent AC activation. Inspected air filtration system and found accumulated particulate matter on pleated filter. Examined copper plumbing configuration with 90-degree elbow joint, noting slight oxidation at soldered connection points where condensation appears to be originating.

Provided estimate for replacement of existing Lennox outdoor condensing unit with new HVAC system. Current system includes an Aprilaire digital humidity control showing 66% humidity level with visible "OUTDOOR TEMP" and "SUGGESTED RH SETTING" indicators. Replacement recommendation includes appropriate equipment sizing and installation on existing pad with proper electrical connections.

Conducted site assessment to develop maintenance plan for approximately six hanging heaters and one water heater. Inspected ceiling-mounted infrared heaters and evaluated access requirements, determining whether ladder access is sufficient or if lift equipment will be needed for future service. Documented electrical connections and control panel configuration for inclusion in maintenance planning documentation.

Responded to a no-heat commercial service call at Unit 13 where thermostat had been stolen. Successfully installed and programmed a new digital programmable thermostat. Confirmed proper system operation with temperature reading at 76° and verified all functions working correctly.

Diagnosed ongoing furnace cycling issue that has persisted since December. Inspected condensate drainage system, noting mineral buildup in the clear trap and checking connected PVC piping for proper installation. Examined wall-mounted plumbing components for potential water damage that could be affecting furnace operation.

Performed annual heating maintenance on boiler system. Inspected all major components including flue pipes, copper supply lines, and control wiring. System appears to be in normal operating condition with no visible leaks or damage to connections; all valves and safety controls functioning properly.

Conducted site assessment at blue metal commercial building to prepare estimate for installation of two mini-split systems. Documented exterior conditions and building characteristics through comprehensive photography to develop appropriate HVAC solution. Estimate completed as requested with pricing information to be provided directly to authorized contact rather than on-site manager.

Diagnosed AC system failure reported as "not coming on" while heating function was operational. Performed electrical diagnostics on control board using multimeter to test connections and components. Identified and repaired faulty wiring connection at the control board, restoring proper communication between thermostat and air conditioning system.

Inspected copper pipe connection point on equipment and identified significant corrosion and mineral buildup around brass fitting. Observed white/grayish crusty substance and potential leak evidence at the connection between copper pipe and tank. Completed quoted repairs to address deteriorated plumbing connection.

Responded to service call for heat pump making excessive noise with ice formation on the unit. Conducted diagnostic inspection of the HVAC system, including examination of the air handler access panel and ductwork components. Inspected electrical connections at the circuit breaker panel, specifically examining the 60-amp and 30-amp Square D breakers supplying power to the system. Customer reported heat is still functional despite the issues.

Responded to customer complaint of backup heat running continuously. Conducted diagnostic testing on Trane heat pump system using ammeter to verify electrical performance. Found multiple "Auxiliary heat running too long" alerts on the ecobee thermostat, confirming the system's excessive reliance on backup heat. Inspected control board connections and verified proper operation of the heat pump.

Performed routine heating maintenance on three geothermal units, excluding newly installed units from Summer 2025. Inspected and serviced Bosch equipment, including checking control circuits and pressure readings on the hydronic system. Disabled auxiliary heat function on thermostats for new geothermal units as per requirements, and addressed Y-strainer and plumbing issues near the filter rack as previously authorized.

Conducted comprehensive assessment of existing electrical panel for AC replacement estimate. Documented current panel configuration, noting multiple breakers of varying sizes with somewhat disorganized wiring distribution. Evaluated available capacity and electrical infrastructure to determine compatibility with proposed new air conditioning system.